How to Use Rolling Mills in Actual Production?

The main function of the rolling mill is to carry on and off, not only to produce the finished wire with large diameter, but also to properly adjust the size of the section of the rolling mill, which effectively ensures the stable rolling and processing of the whole finishing rolling mill.

The main intermediate rolling mills are used in the form of complex double-type, horizontal-type, and continuous-type. The continuous type can also be divided into two types: semi-continuous rolling and full-continuous rolling. When rolling, the rolling stock is a one-time forming looper, which makes it easier to adjust.

Under normal circumstances, the length of the looper is controlled by photoelectricity. If the looper loop type is selected, the principle of the inductor and the principle of the capacitor can be used simultaneously to effectively control the length of the looper.

There are flying shears between the intermediate rolling mill and the finishing mill, mainly for cutting accidents and cutting heads. In order to ensure the balance of the production capacity of different units, as well as the guarantee of the processing accuracy of the products, the general finishing mills will choose a relatively large extension, or a lower speed and multi-slot rolling, but the finishing mills usually use a smaller extension and a higher speed and single-slot multi-rolling method.

The rolling mill can also provide us with good application in many technical productions, and its development is also very good, which will make it easier for future rolling mills to progress.